canDO Valve Controller — clean, OEM‑style control for your exhaust valves.
The canDO Valve Controller provides clean, OEM-style control of your car's exhaust valves—whether one or several—through a dedicated mobile app, without relying on extra remotes. Set the valve states you want, and they behave the way you configure them every drive.
- Mobile app control (no extra remotes)
- Configurable valve positions from 0% to 100% open, or OEM control
- Quiet Start mode for reduced noise at startup
- Over-the-air (OTA) firmware updates
- Automatically adjust valves based on GPS coordinates with user-defined Zones
- Apple CarPlay and Android Auto control — switch modes from your dash without touching your phone
- Clean integration — and best results when bundled with canDO+
Designed to fit. Simple, configurable control of your exhaust valves that integrates cleanly into daily driving.
The canDO Valve Controller connects to the canDO mobile app using Bluetooth® wireless technology.
Why it's different
The canDO Valve Controller gives you precise, ECU-aware control of your exhaust valves — from your phone, your dash, and even your location. No remotes, no compromises.
Advanced control
Go beyond open/closed: 1% precision positioning, ECU + offset and ECU × multiplier modes, GPS Zones, Quiet Start, and live telemetry.
Phone, CarPlay & Android Auto control
Set your valves from the app, or tap through modes on your dash with Apple CarPlay or Android Auto — no carry-around remotes or extra switches.
Truly factory-grade
Plug-and-play in 10–15 minutes with no splicing and no fault codes, fully reversible, and — bundled with canDO+ — it ties into OEM buttons and driving modes like it shipped from the factory.
Apple CarPlay & Android Auto control
Control your exhaust valves right from your dash with Apple CarPlay or Android Auto — no need to open the app or even touch your phone. Switch between OEM, a fixed position, or your custom modes with a single tap while you drive, or glance at the CarPlay widget to see your current mode at a glance.
Only on canDO
No other exhaust valve controller on the market offers these capabilities.
App-controlled valve positions
Control your exhaust valves from the canDO mobile app — no remotes, no aftermarket switches. Set OEM mode to mirror factory behavior, or pick a fixed open percentage from your phone (25%, 50%, 75%, 100%).
1% precision positioning
Set valves to any position from 0% to 100% in 1% steps. No other controller on the market offers this level of precision.
ECU + offset mode
Keep what the ECU is asking for — quiet at idle, open under throttle — and add a constant 25%, 50%, or 75% on top. Valves still respond to your driving, just more open across the board. Only canDO has this mode.
ECU × multiplier mode
Scale whatever the ECU is requesting by 1.25×, 1.5×, 1.75× or 2×. Closed when the factory map says closed, progressively more open everywhere else — same OEM shape, dialed up. Found only on canDO.
Zones
Define zones — your neighborhood, work, the track — and valve positions follow automatically as you cross boundaries. Quiet Start layers on for ignition: override your normal defaults on startup for quieter first moments, add time-of-day windows, and tie it to zones so it only runs where and when you choose. The only valve controller on the market with automation this flexible.
Live telemetry
See live valve position data, along with speed and acceleration — right in the app. The only valve controller with telemetry feedback.
The most advanced valve controller on the market
See how the canDO Valve Controller compares with typical key-fob remote controllers.
| Feature | canDO Valve Controller | Key-fob remote controllers |
|---|---|---|
| Control from your phone | Yes | No |
| Apple CarPlay & Android Auto | Yes | No |
| Valve positioning | 0–100% in 1% steps | Open / closed, some with 25 / 50 / 75% |
| Follows the ECU (offset & multiplier modes) | Yes | No |
| GPS Zones automation | Yes | No |
| Fully configurable startup modeChoose any default valve state for when the car starts | Yes | Some |
| Quiet StartQuieter first moments, with time-of-day windows per zone or outside zones | Yes | No |
| Live valve telemetry | Yes | No |
| Safety monitoring, error alerts & fail-safeDetects lost valve or ECU signal, returns the valves to a safe state and alerts you | Yes | No |
| Over-the-air firmware updates | Yes | No |
| No remote to carry | Yes | No |
| Plug-and-play, no splicing, fully reversible | 10-minute install | Varies |
Based on typical key-fob controllers; features vary by model. “No” means not typically offered.
Get started in 3 steps
Plug-and-play in 10–15 minutes — no splicing, no special tools, no fault codes, fully reversible, and compatible with F4x, F8x, F9x, and G series BMWs.
Plug in the module
Connect the module to the existing exhaust valve harness—multi-valve cars included. No splicing, no cutting, no fault codes — fully reversible.
Pair with the canDO app
Open the canDO mobile app and pair with the module using Bluetooth® wireless technology.
Pick your mode
Choose OEM, a fixed position, ECU + offset, ECU × multiplier, Quiet Start, or define your zones — and you're done.
Want it to feel truly OEM?
Add canDO+ to the Valve Controller and your exhaust valves coordinate with OEM buttons, driving modes, and vehicle state — the cleanest factory-feel integration on the market. Same plug-and-play install. Same reversibility. Save 10%.
See the canDO Bundle →The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by 9512-5837 Québec Inc. (canDO) is under license. Other trademarks and trade names are those of their respective owners.
